GroundGrabba Playa Pack

New Arrival

Notify me when this product is available:


Next Previous


Description

Perfect for securing multiple small tents, a large tent or a large structure in normal to hard ground.

GroundGrabba Pro's are made for general ground use from semi soft to hard grounds.

Perhaps you like setting up on a beach or sand dunes? Then you should try our GroundGrabba Lite 12pack

What You Get

  • 12 x GroundGrabba Pro
  • 12 x HexHook Pro
  • 2 x 3/4" Hex Socket Driver
  • 1 x 3/4" x12" Masonry Drill Bit
  • 1 x Free Bag

GroundGrabba Pro is the heavy duty screw in ground anchor stake. For most ground varieties.

HexHook Pro Lag Bolt Hook Plate Adaptor is a hook plate for securing ropes and tensioners to GroundGrabba Pro or Pro II or Lag Bolts. Designed to fit either the GroundGrabba Pro or Pro II, our HexHook Pro and adapt to ropes or tensioning devices.

The 3/4” Hex Driver is a convenient socket with shank designed to fit the entire range of GroundGrabba Series tent peg-stakes.

Use the Masonry drill bit to create pilot holes into hard earth to help the deployment of your GroundGrabba.

Made of 600D Heavy-Duty Polyester, the GroundGrabba Carry-All Bag I is the perfect portable container for your GroundGrabba Pro and GroundGrabba Lite system.

Specifications

GroundGrabba Pro:

  • Made of heat-treated carbon steel
  • Galvanised for anti-corrosion
  • Weight .5 pound
  • Length 1′
  • Shaft thickness .39″
  • Flights (spirals) 1/4″ wide, .07″ thick
  • 3/4″ hex head with collar
  • >1000Nm torque rating

Weight: .5lbs
Dimensions: 14 × 1 × 1 in

HexHook:

  • Made of mild steel
  • Zinc-plated, anti-corrosion protection
  • .14 pounds total weight
  • 4″ total length
  • 1.6″ total width
  • .19″ plate thickness
  • .31″ hook thickness
  • .7″ hook inner diameter
  • .31″ hook opening
  • 1″ key hole opening
  • 3/4″ hex key
  • 300lb Rated
  • Lifetime Warranty

Weight: 0.16lbs
Dimensions: 11 × 4 × 3.5 in

Socket Driver:

Weight: 0.81lbs
Dimensions: 2 × 2 × 6.5 in

Drill Bit:

  • 1/2” x 12″
  • 1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
  • Made of hardened steel with a tungsten tip.

Weight: 0.129lbs
Dimensions: 30 × 10 × 10 in

Carry All Bag I:

  • 600D Heavy Duty Polyester
  • 18" × 8" × 10" total dimensions
  • 15" x 6" side pocket dimensions
  • Black
  • Designed to carry the GroundGrabba Pro

Additional Information

With the GroundGrabba Pro, it doesn’t matter if you need reliable metal stakes to ground your camping tent or shade structure in the desert or are putting up signs around your business. Perhaps setting up vendor tent gazebos for a party or event, tying down patio furniture, or setting up your pop up carport, outdoor swing set or light aircraft.

There is a primal  need to keep your stuff protected and secure. With our galvanised heat treated carbon steel metal ground anchor stakes, you can feel confident that whatever you are anchoring will remain intact and safe, regardless of weather conditions. This is YOUR stuff and nothings going to mess with it.

Please Note: These are not toys. You will need a powerful drill if attempting to use these in hard ground.

Our HexHook Pro Lag Bolt Hook is your perfect solution for adapting to your lag bolts or of course GroundGrabbas for easy rope attachment. As you know there’s been no solution like this available until now. The HexHook Pro Lag Bolt Hook has more uses than just a lag bolt hook like cracking open your cold beer or even using the built-in hex tool to wind your lag bolts or GroundGrabbas in and out of the ground.

Disclaimer

⚠ Caution: Misuse or abuse of GroundGrabbas can lead to injury or worse to the user or bystanders.  Not to be used with mains powered drills.  When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products.  Only use GroundGrabbas for their intended purpose of ground anchoring things such as tents and shade canopies. Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury.  Always start your drill on the lowest torque setting.  Use a good quality high torque drill or impact wrench.  For hard or extremely hard grounds we recommend pre drilling a ½” pilot hole to help with insertion. Some grounds will be impenetrable.  Use the correct GroundGrabba for the job.  ❌ Do not use in grounds where there are underground services such as but not limited to: electricity, phone, data, water.  ❌ Do not use GroundGrabbas for any other purpose other than ground anchoring. ❌ Not for timber, concrete, rock, bitumen, hot mix, tiles or Hard Large rocky grounds.

Lifetime Warranty

GroundGrabba is made to last! Every GroundGrabba steel product comes with a Lifetime Replacement Warranty against breakage or manufacturer defects. If you ever encounter a problem with your GroundGrabba Steel Pro products, simply let us know and we’ll replace it immediately — no questions asked*.

*conditions apply