We are OPEN and shipping daily!!! Call us with any questions!

GroundGrabba Socket Driver & Drill Bit Set

15 items left

Description

Pack Contains:
1 x Hex Socket driver
1 x Masonry Drill Bit

The 3/4” Hex Driver is a convenient socket with shank designed to fit the entire range of GroundGrabba Series tent peg-stakes.

Use the 1/2″ x 12″ Masonry drill bit to create pilot holes into hard earth to help the deployment of your GroundGrabba.

    Specifications

    Socket Driver:

    • Weight: 0.81lbs
    • Dimensions: 2 × 2 × 6.5 in

    Drill Bit:

    • 1/2” x 12″
    • 1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
    • Made of hardened steel with a tungsten tip.

    Additional Information 

    Simply snap the Hex Driver into any standard cordless rattle guns or drill chuck. This is a common size used with caravans for winding stabelizer legs and other accessories. The 3/4” Hex Driver is of medium strength for normal use. Not intended for use with extremely tough terrain or with high torque drills/rattle guns.

    If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro into the ground then try pre-drilling the ground using the masonry drill bit. You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard.

    Disclaimer

    ⚠ Caution: Misuse or abuse of GroundGrabbas can lead to injury or worse to the user or bystanders.  Not to be used with mains powered drills.  When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products.  Only use GroundGrabbas for their intended purpose of ground anchoring things such as tents and shade canopies. Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury.  Always start your drill on the lowest torque setting.  Use a good quality high torque drill or impact wrench.  For hard or extremely hard grounds we recommend pre drilling a ½” pilot hole to help with insertion. Some grounds will be impenetrable.  Use the correct GroundGrabba for the job.  ❌ Do not use in grounds where there are underground services such as but not limited to: electricity, phone, data, water.  ❌ Do not use GroundGrabbas for any other purpose other than ground anchoring. ❌ Not for timber, concrete, rock, bitumen, hot mix, tiles or Hard Large rocky grounds.